Table of Contents
This is an experimental release intended to test new features for the next stable release.
Wireshark is the world’s most popular network protocol analyzer. It is used for troubleshooting, analysis, development and education.
The following bugs have been fixed:
The following features are new (or have been significantly updated) since version 1.11.2:
Qt port:
- The About dialog has been added
- The Capture Interfaces dialog has been added.
- The Decode As dialog has been added. It managed to swallow up the User Specified Decodes dialog as well.
- The Export PDU dialog has been added.
- Several SCTP dialogs have been added.
- The statistics tree (the backend for many Statistics and Telephony menu items) dialog has been added.
- The I/O Graph dialog has been added.
- French translation has updated.
The following features are new (or have been significantly updated) since version 1.11.1:
- Mac OS X packaging has been improved.
The following features are new (or have been significantly updated) since version 1.11.0:
- Dissector output may be encoded as UTF-8. This includes TShark output.
Qt port:
- The Follow Stream dialog now supports packet and TCP stream selection.
- A Flow Graph (sequence diagram) dialog has been added.
- The main window now respects geometry preferences.
The following features are new (or have been significantly updated) since version 1.10:
- Wireshark now uses the Qt application framework. The new UI should provide a significantly better user experience, particularly on Mac OS X and Windows.
- The Windows installer now uninstalls the previous version of Wireshark silently. You can still run the uninstaller manually beforehand if you wish to run it interactively.
- Expert information is now filterable when the new API is in use.
- The "Number" column shows related packets and protocol conversation spans (Qt only).
- When manipulating packets with editcap using the -C <choplen> and/or -s <snaplen> options, it is now possible to also adjust the original frame length using the -L option.
- You can now pass the -C <choplen> option to editcap multiple times, which allows you to chop bytes from the beginning of a packet as well as at the end of a packet in a single step.
- You can now specify an optional offset to the -C option for editcap, which allows you to start chopping from that offset instead of from the absolute packet beginning or end.
- "malformed" display filter has been renamed to "_ws.malformed". A handful of other filters have been given the "_ws." prefix to note they are Wireshark application specific filters and not dissector filters.
- The ASN1 plugin has been removed as it’s deemed obsolete.
- The GNM dissector has been removed as it was never used.
29West, 802.1AE Secure tag, ACR122, ADB Client-Server, AllJoyn, Apple PKTAP, Aruba Instant AP, ASTERIX, ATN, Bencode, Bluetooth 3DS, Bluetooth HSP, Bluetooth Linux Monitor Transport, Bluetooth Low Energy, Bluetooth Low Energy RF Info, CARP, CFDP, Cisco MetaData, DCE/RPC MDSSVC, DeviceNet, ELF file format, EXPORTED PDU, FINGER, HDMI, HTTP2, IDRP, IEEE 1722a, ILP, iWARP Direct Data Placement and Remote Direct Memory Access Protocol, Kafka, Kyoto Tycoon, Landis & Gyr Telegyr 8979, LBM, LBMC, LBMPDM, LBMPDM-TCP, LBMR, LBT-RM, LBT-RU, LBT-TCP, Lightweight Mesh (v1.1.1), Linux netlink, Linux netlink netfilter, Linux netlink sock diag, Linux rtnetlink (route netlink), Logcat, MBIM, MiNT, MP4 / ISOBMFF file format, MQ Telemetry Transport Protocol, Novell PKIS certificate extensions, NXP PN532 HCI, Open Sound Control, OpenFlow, Pathport, PDC, Picture Transfer Protocol Over IP, PKTAP, Private Data Channel, QUIC (Quick UDP Internet Connections), SAE J1939, SEL RTAC (Real Time Automation Controller) EIA-232 Serial-Line Dissection, Sippy RTPproxy, SMB-Direct, STANAG 4607, STANAG 5066 DTS, STANAG 5066 SIS, Tinkerforge, Ubertooth, UDT, URL Encoded Form Data, USB Communications and CDC Control, USB Device Firmware Upgrade, VP8, WHOIS, Wi-Fi Display, and ZigBee Green Power profile
Netscaler 2.6, STANAG 4607, and STANAG 5066 Data Transfer Sublayer
The libwireshark API has undergone some major changes:
- A more flexible, modular memory manager (wmem) has been added. It was available experimentally in 1.10 but is now mature and has mostly replaced the old emem API (which is deprecated).
- A new API for expert information has been added, replacing the old one.
- The tvbuff API has been cleaned up: tvb_length has been renamed to tvb_captured_length for clarity, and tvb_get_string and tvb_get_stringz have been deprecated in favour of tvb_get_string_enc and tvb_get_stringz_enc.
Wireshark source code and installation packages are available from http://www.wireshark.org/download.html.
Most Linux and Unix vendors supply their own Wireshark packages. You can usually install or upgrade Wireshark using the package management system specific to that platform. A list of third-party packages can be found on the download page on the Wireshark web site.
Wireshark and TShark look in several different locations for preference files, plugins, SNMP MIBS, and RADIUS dictionaries. These locations vary from platform to platform. You can use About→Folders to find the default locations on your system.
Dumpcap might not quit if Wireshark or TShark crashes. (Bug 1419)
The BER dissector might infinitely loop. (Bug 1516)
Capture filters aren’t applied when capturing from named pipes. (ws-buglink:1814)
Filtering tshark captures with read filters (-R) no longer works. (Bug 2234)
The 64-bit Windows installer does not support Kerberos decryption. (Win64 development page)
Resolving (Bug 9044) reopens (Bug 3528) so that Wireshark no longer automatically decodes gzip data when following a TCP stream.
Application crash when changing real-time option. (Bug 4035)
Hex pane display issue after startup. (Bug 4056)
Packet list rows are oversized. (Bug 4357)
Summary pane selected frame highlighting not maintained. (Bug 4445)
Wireshark and TShark will display incorrect delta times in some cases. (Bug 4985)
The 64-bit Mac OS X installer doesn’t support Mac OS X 10.9 (Bug 9242)
Community support is available on Wireshark’s Q&A site and on the wireshark-users mailing list. Subscription information and archives for all of Wireshark’s mailing lists can be found on the web site.
Official Wireshark training and certification are available from Wireshark University.
A complete FAQ is available on the Wireshark web site.
Riverbed is Wireshark's primary sponsor and provides our funding. They also make great products.
Troubleshoot your Network
Free 30 day trial
- Save hours on network and application issue diagnoses
- Monitor physical and virtual environments
- GUI packet capture and analysis
- Fully integrated with Wireshark
Try Cascade Shark VE & Cascade Pilot Free for 30 Days
802.11 Packet Capture
- WLAN packet capture and transmission
- Full 802.11 a/b/g/n support
- View management, control and data frames
- Multi-channel aggregation (with multiple adapters)
Packet Analysis Made Easy
- Visually rich, powerful LAN analyzer
- Quickly access very large pcap files
- Professional, customizable reports
- Advanced triggers and alerts
- Fully integrated with Wireshark
